مقالات ISI انگلیسی |خبرخوان انجمن های علمی ایران

تاریخ خبر: // کد خبر: 13952 // //

مقالات ISI انگلیسی

مقالات ISI انگلیسی  | تاریخ ارسال: ۱۳۹۷/۱۲/۲۳ |  International Journal Papers [۱] SHOJAEEFARD M., AKBARI M., KHALKHALI A., ASADI P., “Effect of tool pin profile on distribution of reinforcement particles during friction stir processing of B4C/aluminum composites”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS . [۲] SHOJAEEFARD M., “Numerical [...]

مقالات ISI انگلیسی ::
 | تاریخ ارسال: ۱۳۹۷/۱۲/۲۳ | 
International Journal Papers
[۱] SHOJAEEFARD M., AKBARI M., KHALKHALI A., ASADI P., “Effect of tool pin profile on distribution of reinforcement particles during friction stir processing of B4C/aluminum composites”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS .
[۲] SHOJAEEFARD M., “Numerical Investigation of flow Control by suction and Inhection on a subsonic”, American Journal of Applied Scinces , 2005.
[۳] SHOJAEEFARD M., “Transient Thermal Analysis of Engine Exhaust Valve”, Journal of Numerical Heat transfer , 2005.
[۴] SHOJAEEFARD M., “Numerical Simulation of 2-D Turbidity Currents and Wall Jet”, American Journal of Applied Sciences , 2006.
[۵] SHOJAEEFARD M., “Studies on the Influence of Various Blade Outlet Angles in a Centrifugal Pump”, American Journal of Applied Sciences , 2006.
[۶] SHOJAEEFARD M., “Thernal contact analysis using system Identification”, heat transfer Engindering , 2006.
[۷] SHOJAEEFARD M., “thernal contact analysisloing system identi fram nonlonear models”, american journal of applied scinces , 2006.
[۸] Shojaeefard M H, Hosseinimanesh Bahrami 3D Modeling of the Effect of the Louvered Fins in Compact Heatexchangers by Computational Fluid Dynamic IUST International Journal of Engineering Science ( submitted), 2007.
[۹] M H Shojaeefard, K Goudarzi, A R Noorpoor and M Fazelpour “A Study of Thermal Contact using Nonlinear System Identification Models” – Department of Mechanical Engineering Department of Automotive Engineering Iran University of Science and Technology”, 2007.
[۱۰] SHOJAEEFARD M., “expermental and numerical investigation of centrifugal pump performance when handling viscous fluids with different outlet blade angles”, journal of faculty of eng vol 34 no 2 , 2007.
[۱۱] Shojaeefard M H, Goudarzi K and Ghasvari Jahromi H, “Numerical Simulation of 2_D Turbidity Currents and Wall Jet,” American Journal of Applied Sciences x (x) xx-xx 2007 ISSN 1546-9239″, 2007.
[۱۲] Shojaeefard M H Hosseinimanesh, “CFD study and Experimental Comparison of the Solid- Liquid Flow Separation in a Dual lnvolutes Axial Flow Cyclonic Separator ( Isep)” Journal of Multiphase Flow2007″, 2007.
[۱۳] M H Shojaefard and K Goudarzi, “The Numerical Estimation of Thermal Contact Resistance in Contacting Surfaces”, Department of Automotive Engineering Department of Mechanical Engineering Iran University of Science and Technology Tehran Iran”, 2007.
[۱۴] Shojaeefard M H, Noorpoor A R, Yarjiabadi H and Havivian M, “Particle Size Dffects on Hydro- Cyclone Performance”, IUST International Journal of Engineering Science Vol 17 No 3-4 2006 Page 9-19″, 2008.
[۱۵] SHOJAEEFARD M., “numerical simulation of flow over an air foil with a cross flow fan as a lift as a lift generating member in a new air craft model”, AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY , 2008.
[۱۶] SHOJAEEFARD M., “shape optimization of the airfoil comprising a cross flow fan”, AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY , 2008.
[۱۷] Shojaeefard M H, Goudarzi K and M Sh Mazidi “Inverse Heat Transfer Problem of Thermal Contact Conductance Estimation in Periodically Contacting Surfaces,” Journal of Thermal Science Volume (18) No 2 2009 pp 150-159 (in press) , 2008.
[۱۸] Shojaeefard M H and Goudarzi K, “The Numerical Estimation of Thermal Contact Resistance in contacting surfaces”, American Journal of Applied Sciences 5(11) 1566-1571, 2008
[۱۹] SHOJAEEFARD M., “namerical investigation of flow in the liner of a model reverse – fiow gas turbin combustor”, department of mechanical engineering , 2009.
[۲۰] SHOJAEEFARD M., “numerical study of airflow around vehicle a-pillar region and windnoise generation prediction”, mechanical engineering department , 2009.
[۲۱] SHOJAEEFARD M., “Experimental study of stall in an airfoil with forced airflow provided by an integrated cross- flow fan”, J of Aerospace Engineering , 2010.
[۲۲] SHOJAEEFARD M., “Application of Inverse Method to The problem of thermal contact”, International Journal of Heat and Technology , 2011.
[۲۳] SHOJAEEFARD M., “comparison of steel aluminum and composite bonnet in terms of pedestrian head impact”, SAFETY SCIENCE, PP. 1_10, 2011.
[۲۴] SHOJAEEFARD M., “Differential Quadrature Solution of A transient Two- Dimensional Heat Conduction Problem”, International Journal of Energy and Technology , 2011.
[۲۵] SHOJAEEFARD M., “Mathematical Modeling of Potential Flow Over a Rotating Cylinder”, IJE , 2011.
[۲۶] SHOJAEEFARD M., “Numerical and analytical solution of compressible flow over double wedge and biconvex airfoils”, Engineering computations International Journal, Vol. 28, No. 4, PP. 441_447, 2011.
[۲۷] SHOJAEEFARD M., “Optimization of sound transmission through laminated composite cylindrical shells using GA”, Journal Mechanics of Composite Materials , 2011.
[۲۸] SHOJAEEFARD M., “The Two- dimensional Modeling of a Salt- Gradient Solar Pond witn Wall”, Journal of Thermal Science , 2011.
[۲۹] SHOJAEEFARD M., TALEBITOOTI R., “A study of Intake system noise transmission with porous Insulator using Statistical Energy Analysis”, بین المللی مهندسی خودرو , ۲۰۱۱.
[۳۰] SHOJAEEFARD M and TALEBITOOTI R., “optimization of sound transmission theough laminated composite culindrical shells by using a genetic algorithhm”, MECHANICS OF COMPOSITE MATERIALS, Vol. 47, No. 4, PP. 481_494, 2011.
[۳۱] KHALKHALI A. and SHOJAEEFARD M., “A parametric study for improving the centrifugal pump impeller for use in viscous fluid pumping”, HEAT AND MASS TRANSFER, Vol. 49, PP. 197_206, 2012.
[۳۲] KHALKHALI A. and SHOJAEEFARD M., “Artificial neural networks based prediction of performance and exhaust emissions in direct injection engine using castor oil biodiesel-diesel blends”, Journal of Renewable and Sustainable Energy , 2012.
[۳۳] SHOJAEEFARD M., “Artificial Neural Network Based Multi-Objective Evolutionary Optimization of a Heavy-Duty Diesel Engine”, international journal of automotive engineering , 2012.
[۳۴] SHOJAEEFARD M., “Cooled EGR in a Turbo Charged SI Engine to Reduce Knocking and Fuel Consumption”, ijae , 2012.
[۳۵] SHOJAEEFARD M., “Experimental and numerical study of an airfoil in combination with a cross flow fan”, Institution of Mechanical Engineers, PP. 1173_1187, 2012.
[۳۶] SHOJAEEFARD M., “modeling and pareto optimization of mechanical properties of friction stir welded AA7075/AA5083 butt joints using neural network and particle swarm algorithm”, material and design , 2012.
[۳۷] SHOJAEEFARD M., “Numerical investigation on efects of induced jet on boundary layer and turbulent models arond airfoils”, HEAT AND MASS TRANSFER, Vol. 40, No. 11 , 2012.
[۳۸] SHOJAEEFARD M., “Numerical study of the effect of some geometric characteristics of a cenrifugal pump impeller that pumps a viscous fluid”, computer and fluids , 2012.
[۳۹] SHOJAEEFARD M., “Computer Simulation of Performance and Transient Behavior of A Salt Gradient Solar Pond”, Jokull, Vol. 63, PP. 58_76, 2013.
[۴۰] SHOJAEEFARD M., “Investigation on natural frequency of an optimized”, latin american journal of sloids and structures, Vol. 11, PP. 113_129, 2013.
[۴۱] SHOJAEEFARD M., “Sensitivity Analysis of the Artificial Neural Network Outputs in Friction Stir Lap Joining of Aluminum to Brass”, Advances in Materials Science and Engineering , 2013.
[۴۲] SHOJAEEFARD M., “The estimation of time-varying thermal contact conductance between two fixed contacting surfaces”, Mechanika, Vol. 19, PP. 167_171, 2013.
[۴۳] SHOJAEEFARD M., “the investigation of the valve spring stiffiness influence on the thermal contact conductance between the exhaust valve and its seat”, heat transfer engineering an international journal, No. 6611 , 2013.
[۴۴] SHOJAEEFARD M and TALEBITOOTI R., “Enhancing Rollover Threshold of an Elliptical Container Based on Binary-coded Genetic Algorithm”, international journal of automotive engineering, Vol. 3, No. 1, PP. 318_327, 2013.
[۴۵] SHOJAEEFARD M., Eteghani M., Tahani M. and AKBARI M., “Cooled EGR for a Turbo Charged SI Engine to Reduce Knocking and Fuel Consumption”, international journal of automotive engineering, Vol. 3, No. 3, PP. 474_481, 2013.
[۴۶] TALEBITOOTI R. and SHOJAEEFARD M., “Optimum Design of 1st Gear Ratio for 4WD Vehicles Based onVehicle Dynamic Behaviour”, Advances in Mechanical Engineering , 2013.
[۴۷] GOODARZI A., SOLTANI A., SHOJAEEFARD M., and KHAJEPOUR A., “An integrated vehicle dynamic control strategy for three-wheeled vehicles”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, No. 558741 , 2014
[۴۸] SHOJAEEFARD M., AKBARI M., ASADI P., “Multi objective optimization of friction stir welding parameters using FEM and neural network”, Academia-Revista Latinoamericana de Administracion, Vol. 15, No. 11, PP. 2351_2356, 2014.
[۴۹] SHOJAEEFARD M., AKBARI M., KHALKHALI A., ASADI P.,  and Parivar A H, “Optimization of microstructural and mechanical properties of friction stir welding using the cellular automaton and Taguchi method”, MATERIALS and DESIGN, Vol. 64, PP. 660_666, 2014.
[۵۰] SHOJAEEFARD M., KHALKHALI A., MIANDOABCHI E., “Effects of Process Parameters on Superplastic Forming of a License Plate Pocket Panel”, international journal of advanced design and manufacturing technology, Vol. 7, No. 2, PP. 25_33, 2014.
[۵۱] SHOJAEEFARD M., NAJIBI A., ANBARLOEI M., and Yeganeh M, “Experimental and numerical crashworthiness investigation of combined circular and square sections”, Journal of Mechanical Science and Technology, Vol. 28, PP. 999_1006, 2014.
[۵۲] SHOJAEEFARD M., NAJIBI A., RAHMATI AHMAD, and ABADI M., “Pedestrian safety investigation of the new inner structure of the hood to mitigate the impact injury of the head”, THIN-WALLED STRUCTURES, Vol. 77, PP. 77_85, 2014.
[۵۳] SHOJAEEFARD M., TALEBITOOTI R., AHMADI R., and GHEYBI M., “Sound transmission across orthotropic cylindrical shells using third-order shear deformation theory”, Latin American Journal of Solids and Structures, Vol. 11, No. 11, PP. 2039_2072, 2014.
[۵۴] SHOJAEEFARD M., TALEBITOOTI R., AHMADI R., and Ranjbar B, “A study on acoustic behavior of poroelastic media bonded between laminated composite panels”, Latin American Journal of Solids and Structures, Vol. 11, No. 13, PP. 2379_2407, 2014.
[۵۵] SHOJAEEFARD M., TALEBITOOTI R., Ranjbar B, and AHMADI R., “Power transmission through double-walled laminated composite panels considering porous layer-air gap insulation”, APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, Vol. 35, PP. 1447_1466, 2014.
[۵۶] SOLTANI A., GOODARZI A., SHOJAEEFARD M., and KHAJEPOUR A., “Vehicle dynamics control using an active third-axle system”, VEHICLE SYSTEM DYNAMICS, Vol. 52, No. 11, PP. 1541_1562, 2014.
[۵۷] MIRZAEI A., SHOJAEEFARD M., BABAIE A., YASSI Y., “Experimental study of redesigned draft tube of an Agnew microhydro turbine”, ENERGY CONVERSION AND MANAGEMENT, Vol. 105, PP. 488_497, 2015.
[۵۸] SHOJAEEFARD M., and KESHAVARZ LELEKAMI M., “Mathematical modeling of the complete thermodynamic cycle of a new Atkinson cycle gas engine”, APPLIED THERMAL ENGINEERING, Vol. 91, PP. 866_874, 2015.
[۵۹] SHOJAEEFARD M., KHALKHALI A., AKBARI M., and ASADI P., “Investigation of friction stir welding tool parameters using FEM and neural network”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 229, No. 3, PP. 209_217, 2015.
[۶۰] HOJAEEFARD M., KHALKHALI A., and FIROUZGAN A., “Experimental and Numerical Flow Investigation of Intake Manifold and Multi Criteria Decision Making on 3-cylinder SI Engine using Technique for Order of Preference by Similarity to Ideal Solution”, International Journal of Engineering, Vol. 28, No. 11, PP. 1663_1670, 2015.
[۶۱] SHOJAEEFARD M., KHALKHALI A., SARMADI M., and HAMZEHI N., “Investigation on the optimal simplified model of BIW structure using FEM”, Latin American Journal of Solids and Structures, Vol. 12, No. 10, PP. 1972_1990, 2015.
[۶۲] SHOJAEEFARD M., MOLAEIMANESH G., AGHAMIRZAEE N.A., QEZEL BEYG LOO S., and ZEINOLABEDINI B., “Numerical evaluation of the defrosting/defogging performance of HVAC system in the main product of the national vehicle platform”, international journal of automotive engineering, Vol. 5, No. 4, PP. 2006_2016, 2015.
[۶۳] SHOJAEEFARD M., SALIMIAN RIZI M., KHALKHALI A., and Tahani M, “A New Method to Calculate Centrifugal Pump Performance Parameters for Industrial Oils”, Journal of Applied Fluid Mechanics “JAFM”, Vol. 8, No. 4, PP. 673_681, 2015.
[۶۴] TALEBITOOTI R., AHMADI R., and SHOJAEEFARD M., “Three-dimensional wave propagation on orthotropic cylindrical shells with arbitrary thickness considering state space method”, COMPOSITE STRUCTURES, Vol. 132, PP. 239_254, 2015.
[۶۵] TALEBITOOTI R., SHOJAEEFARD M., and YARMOHAMMADI S., “Shape design optimization of cylindrical tank using b-spline curves”, COMPUTERS and FLUIDS, Vol. 109, PP. 100_112, 2015.
[۶۶] MAHMOODI A., SHOJAEEFARD M., and SAEIDI GOOGARCHIN H., “Theoretical development and numerical investigation on energy absorption behavior of tapered multi-cell tubes”, THIN-WALLED STRUCTURES, Vol. 102, PP. 98_110, 2016.
[۶۷] NAJAFI F., SHOJAEEFARD M., and SAEIDI GOOGARCHIN H., “Nonlinear low-velocity impact response of functionally graded plate with nonlinear three-parameter elastic foundation in thermal field”, COMPOSITES PART B-ENGINEERING, Vol. 107, PP. 123_140, 2016.
[۶۸] NAJIBI A., SHOJAEEFARD M., and YEGANEH M, “Developing and Multi-Objective Optimization of a Combined Energy Absorber Structure Using Polynomial Neural Networks and Evolutionary Algorithms”, Latin American Journal of Solids and Structures, Vol. 13, PP. 2552_2572, 2016.
[۶۹] SHOJAEEFARD M., EBRAHIMI NEJAD RAFSANJANI S., and MASJEDI M., “Vehicle Directional Stability Control Using Bifurcation Analysis of Yaw Rate Equilibria”, international journal of automotive engineering, Vol. 6, No. 1, PP. 2065_2074, 2016.
[۷۰] SHOJAEEFARD M., and HAKIMOLLAHI M., “A Comparison on Automotive NPD S PerformanceFactors between Academia Developed and Developing Countries (Case Study)”, Transylvanian Review, No. 11, PP. 2867_2879, 2016.
[۷۱] SHOJAEEFARD M., KHALKHALI A., and FIROUZGAN A., “Intake Manifold Flow Assessment ona 3-cylinder Natural Aspirated Downsized Engine Using CFD and GT-SUITE”, International Journal of Engineering, Vol. 29, No. 2, PP. 255_263, 2016.
[۷۲] SHOJAEEFARD M., KHALKHALI A., and FIROUZGAN A., “Multi-objective optimization of a natural aspirated three-cylinder spark ignition engine using modified non-dominated sorting genetic algorithm and multicriteria decision making”, Journal of Renewable and Sustainable Energy, Vol. 8, No. 025705, PP. 025705-1_025705-20, 2016.
[۷۳] SHOJAEEFARD M., KHALKHALI A., and MIANDOABCHI E., “Multi-criteria decision making approach for selecting the best friction distribution in superplastic forming of a vehicle component”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 230, PP. 146_157, 2016.
[۷۴] SHOJAEEFARD M., KHALKHALI A., and TAVAKKOLI LAHIJANI A., “Parametric Modal Study and Optimization of the Floor Pan of a B-Segment Automotive Using a Hybrid Method of Taguchi and a Newly Developed MCDM Model”, Latin American Journal of Solids and Structures, Vol. 13, PP. 3039_3061, 2016.
[۷۵] SHOJAEEFARD M., MOLAEIMANESH G., NAZEMIAN M., and MOGHADARI M., “A review on microstructure reconstruction of PEM fuel cells porous electrodes for pore scale simulation”, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 41, No. 44, PP. 20276_20293, 2016.
[۷۶] SHOJAEEFARD M., and ZARE J., “Modeling and combined application of the modified NSGA-II and TOPSIS to optimize a refrigerant-to-air multi-pass louvered fin-and-flat tube condenser”, APPLIED THERMAL ENGINEERING, Vol. 103, PP. 212_225, 2016.
[۷۷] SIAVASHI M., and SHOJAEEFARD M., “Numerical Simulation of Air Flow around the NP Car Using the Realizable k- Turbulence Model to Predict Aerodynamic Forces and Moments”, international journal of automotive engineering, Vol. 5, No. 2, PP. 2148_2162, 2016.
[۷۸] NAJIBI A., and SHOJAEEFARD M., “ElasticMechanical Stress Analysis in a ۲D-FGMThick Finite LengthHollow CylinderwithNewlyDeveloped MaterialModel”, ACTA MECHANICA SOLIDA SINICA, Vol. 2, No. 29, PP. 178_191, 2016.
[۷۹] AKBARI M., SHOJAEEFARD M., ASADI P., and KHALKHALI A., “Hybrid multi-objective optimization of microstructural and mechanical properties of B 4 C/A356 composites fabricated by FSP using TOPSIS and modified NSGA-II”, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 27, No. 11, PP. 2317_2333, 2017.
[۸۰] AKBARI M., SHOJAEEFARD M., ASADI P., and KHALKHALI A., “Wear and mechanical properties of surface hybrid metal matrix composites on AlSi aluminum alloys fabricated by friction stir processing”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, PP. 1464420717, 2017.
[۸۱] AKBARI M., SHOJAEEFARD M., ASADI P., and KHALKHALI A., “Wear Performance of A356 Matrix Composites Reinforced with Different Types of Reinforcing Particles”, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 26, No. 9, PP. 4297_4310, 2017.
[۸۲] NAJAFI F., SHOJAEEFARD M., and SAEIDI GOOGARCHIN H., “Low-velocity impact response of functionally graded doubly curved panels with Winkler-Pasternak elastic foundation An analytical approach”, COMPOSITE STRUCTURES, Vol. 162, PP. 351_364, 2017.
[۸۳] NAJAFI F., SHOJAEEFARD M., and SAEIDI GOOGARCHIN H., “Nonlinear dynamic response of FGM beams with Winkler Pasternak foundation subject to noncentral low velocity impact in thermal field”, COMPOSITE STRUCTURES, Vol. 167, PP. 132_143, 2017.
[۸۴] SHOJAEEFARD M., AKBARI M., ASADI P., and KHALKHALI A., “The effect of reinforcement type on the microstructure mechanical properties and wear resistance of A356 matrix composites produced by FSP”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 91, PP. 1391_1407, 2017.
[۸۵] SHOJAEEFARD M., EBRAHIMI NEJAD RAFSANJANI S., and KAMARKHANI S., “Optimization of Exhaust System Hangers for Reduction of Vehicle Cabin Vibrations”, international journal of automotive engineering, Vol. 7, No. 1, PP. 2313_2324, 2017.
[۸۶] SHOJAEEFARD M., and HAKIMOLLAHI M., “NPDs Performance Measurement Model of Automotive Industry”, Transylvanian Review, Vol. 17, No. 18, PP. 4608_4617, 2017.
[۸۷] SHOJAEEFARD M., KHALKHALI A., EBRAHIMI NEJAD RAFSANJANI S., and GHADIRINEJAD K., “Numerical investigation on automotive bumper structure improvements for pedestrian protection”, INTERNATIONAL JOURNAL OF CRASHWORTHINESS, No. 22, PP. 1_19, 2017.
[۸۸] SHOJAEEFARD M., KHALKHALI A., FAGHIHIAN H., and DAHMARDEH M., “Optimal platform design using non-dominated sorting genetic algorithm II and technique for order of preference by similarity to ideal solution application to automotive suspension system”, ENGINEERING OPTIMIZATION, No. 5, PP. 1_12, 2017.
[۸۹] SHOJAEEFARD M., KHALKHALI A., and YARMOHAMMADI S., “An efficient sensitivity analysis method for modified geometry of Macpherson suspension based on Pearson correlation coefficient”, VEHICLE SYSTEM DYNAMICS, Vol. 55, No. 6, PP. 827_852, 2017.
[۹۰] SHOJAEEFARD M., MOLAEIMANESH G., YARMOHAMMADI S., and CHANGIZIAN S., “Multi-objective optimization of an automotive louvered fin-flat tube condenser for enhancing HVAC system cooling performance”, APPLIED THERMAL ENGINEERING, Vol. 125, PP. 546_558, 2017.
[۹۱] SHOJAEEFARD M., SAEIDI GOOGARCHIN H., GHADIRI M., and MAHINZARE M., “Micro temperature-dependent FG porous plate Free vibration and thermal buckling analysis using modified couple stress theory with CPT and FSDT”, APPLIED MATHEMATICAL MODELLING, Vol. 50, PP. 633_655, 2017.
[۹۲] SHOJAEEFARD M., ZARE J., and NOURBAKHSH S., “An investigation of the effects of geometry design on refrigerant flow mal-distribution in parallel flow condenser using a hybrid method of finite element approach and CFD simulation”, APPLIED THERMAL ENGINEERING, Vol. 112, PP. 431_449, 2017.
[۹۳] SHOJAEEFARD M., ZARE J., and NOURBAKHSH S., “Developing a hybrid procedure of one dimensional finite element method and CFD simulation for modeling refrigerant flow mal-distribution in parallel flow condenser”, INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, Vol. 73, PP. 39_53, 2017.
[۹۴] YARMOHAMMADI S., SHOJAEEFARD M., and KHALKHALI A., “A family base optimization of a developed nonlinear vehicle suspension model using gray family design algorithm”, NONLINEAR DYNAMICS, Vol. 90, PP. 649_669, 2017.
[۹۵] MOGHADARI M., SHOJAEEFARD M., and MOLAEIMANESH G., “Effects of electrode compression on the water droplet removal from proton exchange membrane fuel cells”, KOREAN JOURNAL OF CHEMICAL ENGINEERING , 2018.
[۹۶] SALAMI Y.Y., SHOJAEEFARD M., and MOLAEIMANESH G., “Thermal behavior of a commercial prismatic Lithium-ion battery cell applied in electric vehicles”, international journal of automotive engineering, Vol. 8, No. 2, PP. 2700_2708, 2018.
[۹۷] SHOJAEEFARD M., MAHINZARE M., SAFARPOUR H., SAEIDI GOOGARCHIN H., and GHADIRI M., “Free vibration of an ultra-fast-rotating-induced cylindrical nano-shell resting on a Winkler foundation under thermo-electro-magneto-elastic condition”, APPLIED MATHEMATICAL MODELLING, Vol. 61, PP. 255_279, 2018.
[۹۸] SHOJAEEFARD M., MALEKI M., MASIH-TEHRANI M., SANGSEFIDI A., and NIROOBAKHSH M., “Designing a buffer-equipped hydraulic engine mount for mid-priced vehicles”, international journal of automotive engineering, Vol. 8, No. 2, PP. 2692_2699, 2018.
[۹۹] SHOJAEEFARD M., SAEIDI GOOGARCHIN H., MAHINZARE M., and ADIBI M., “Vibration and buckling analysis of a rotary functionally graded piezomagnetic nanoshell embedded in viscoelastic media”, JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 29, PP. 2344_2361, 2018.
[۱۰۰] SHOJAEEFARD M., SAEIDI GOOGARCHIN H., MAHINZARE M., and EFTEKHARI S., “Magnetic field effect on free vibration of smart rotary functionally graded nano/microplates A comparative study on modified couple stress theory and nonlocal elasticity theory”, JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 29, PP. 2492_2507, 2018.
[۱۰۱] SHOJAEEFARD M., SAEIDI GOOGARCHIN H., MAHINZARE M., and GHADIRI M., “Free vibration and critical angular velocity of a rotating variable thickness two-directional FG circular microplate”, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Vol. 24, PP. 1525_1543, 2018.
[۱۰۲] TAVAKKOLI LAHIJANI A., SHOJAEEFARD M., and KHALKHALI A., “Optimal design of the floor panel for an automotive platform under uncertainty of the vehicle lengthof the vehicle lengthof”, Geomechanics and Engineering, Vol. 14, No. 1, PP. 91_98, 2018.
[۱۰۳] SAEIDI GOOGARCHIN H., PASANDIDEH POOR M., MAHMOODI A., and SHOJAEEFARD M., “Energy absorption analysis for tapered multi-cell tubes improved by foams Theoretical development and numerical simulation”, COMPOSITE STRUCTURES, Vol. 207, PP. 213_222, 2019.
برچسب های خبر: ,,

آخرین اخبار انجمن های علمی

اخبار ویژه

آرشیو

اخبار متفرقه

آرشیو

پربازدید

بایگانی شمسی

آمار بازدید وبسایت

  • 0
  • 275
  • 26
  • 120
  • 33
  • 898
  • 3,036
  • 179,758
  • 179,758
  • 57,491
  • 10,294
  • 8,793
  • 0
  • فروردین ۲, ۱۳۹۸